Are these products compliant with the Americans with Disabilities Act (ADA)?
We do have select profiles that meet ADA standards. Please check our product pages and look for the symbol, which
You’ve got questions, and we’ve got expert answers—straight from the mouths of the most experienced industry professionals.
We do have select profiles that meet ADA standards. Please check our product pages and look for the symbol, which
No, wood-based products do not do well in wet areas. Water will make them swell, causing problems.
We do have select profiles that meet ADA standards. Please check our product pages and look for the symbol, which
Depending on the profile, you can use tin snips, a knife for the smaller trims, or a saw/miter saw for
For the smaller trims—stair nosings, reducers, and caps—you should use contact cement/tape. For larger profiles—stair treads and equalizers—you can use
No, these products are not UV stable. They will not stand up to the elements.
If too much force or uneven force is used to hammer M-D PRO Tapdown trims over carpet, the powder coated
We do have select profiles that meet ADA standards. Please check our product pages and look for the symbol, which
Stair nosings are secured using a combination of premium construction adhesive and flat head nails.
¼” X ¼” SQUARE NOTCH TROWEL FOR PROVA-FLEX. FOR THE TILE IT DEPENDS ON THE TILE SIZE, THICKNESS AND BACK
YES. IT ACTUALLY MAKES IT EASIER TO INSTALL TILE FOR LINE MARKING AND EVEN DRYING TIME WHEN INSTALLING THE TILE.
YOU CAN, PROVIDED YOU DO NOT WALK ON PROVA-FLEX. IF YOU MUST TILE THE SAME DAY, PROTECT PROVA-FLEX WITH A
PROVA-FLEX IS AN IDEAL UNCOUPLING, CRACK-ISOLATION MEMBRANE FOR USE OVER HYDRONIC HEATING SYSTEMS.
FOR ELECTRIC HEATING SYSTEMS, IT IS
JOINT STRIP MUST BE USED WHEN YOU ARE WATERPROOFING A TILED LAUNDRY ROOM OR SIMILLAR ABOVE-GRADE AREA WHERE A DRAIN
NO THAT IS WHAT PROVA-MAT OR PROVA BOARD IS FOR.
NO! UNLESS IT IS PROTECTED FROM THE ELEMENTS SO RAIN OR SNOW CANNOT GET ON THE TILE OR STONE.
NO! YOU MUST PUT ANOTHER LAYER OF PLYWOOD TO ACHIEVE -1 ¼” THICKNESS AND SUBSTRATE MUST MEET THE TCNA OR
YOU MUST USE PREMIUM POLYMER-MODIFIED THINSET MORTAR THAT MEETS ANSI A118.4 (FOR PRODUCT WARRANTIES) OR ANSI A118.15 (FOR A LIFETIME
View our calendar and discover events that spark your interest.
Stay informed with our insightful blogs and in-depth case studies.