Trims for Carpet, Sheet Vinyl & Specialty
M-D® PRO trims and transitions feature solutions for finishing carpet and sheet vinyl floor, stair, and specialty applications.
Floor Profiles
Explore Products
Bevel Bars
1” (25 mm) Residential Bevel Bar for transitions Made for height differentials of up to 5/16”(8 mm) Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 1” (25 mm) Bevel Bar for transitions Made for height differentials of up to 5/16”(8mm) Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 2” (51 mm) Commercial weight Bevel Bar for transitions Designed for use in high traffic areas or where extreme height differentials exist Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 1-1/2” (38 mm) Heavy Duty Bevel Bar for heavy traffic applications Made for height differentials of up to 3/8” (10 mm) Designed for use in high traffic areas Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile Pinless Channel designed for use where rubber backed carpet meets dissimilar flooring For use with all 1/8” (3 mm) Leg “E” or “T” caps Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore there is a high risk of… Pinless Channel designed for areas where extra strength or height is needed Extra height for installations where floor coverings are over 3/8” (9.5 mm) high but less than 5/8” (16 mm) Tack strips can be used when installing under pad For use with all 1/8” (3 mm) Leg “E” or… Pinned Channel designed for use where action backed carpet meets dissimilar flooring Ultra Pin continuous pinning system for maximum holding strength For use with all 1/8” (3 mm) Leg “E” or “T” caps Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its… Wide Pinned Channel designed for areas where extra strength or height is needed Added strength of one piece aluminum track holds up under increased traffic Ultra Pin continuous pinning system for maximum holding strength Extra height for installations where floor covering are over 3/8” (10 mm) high but less than… 1 -1/4″ (32 mm) Seam Binder designed for seams where greater bridging is required Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 1” (25 mm) Seam Binder designed for binding seams at doorways where dissimilar floors of equal height meet Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 3/4″ (19 mm) Multi-Purpose Tapdown that can be used for carpet underpad installation or glue down installations The large lip covers even the thickest carpets with room for tucking the edge Tackless can be used on the bottom for carpet with underpad installations Made of durable hammered aluminum Attractive finish… 5/8″ (16 mm) Heavy-Duty Pinless Tapdown for use with rubber backed and direct glue down installations Nail holes on 12” (30.5cm) centres Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 1/2″ (12.5 mm) Residential weight Pinless Tapdown designed for use with foam backed carpet or direct glue down installations Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 3/4″ (19 mm) Commercial duty Pinless Tapdown for use in high traffic commercial settings Used in glue down carpet installations Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles 9/16” (14.5 mm) Residential weight Pinned Tapdown designed for use with low to medium pile action backed carpet up to 30 oz. Ultra Pin system for maximum holding strength Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 9/16” (14.5 mm) Residential weight pinned Tapdown with additional top return to lock in carpet. For use with low to medium pile action backed carpet up to 30 oz. Ultra Pin system for maximum holding strength Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA… 5/8″ (16 mm) Heavy-Duty Pinned Tapdown for use with high pile action backed carpet up to 60 oz. Ultra Pin system for maximum holding strength Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 3/4″ (19 mm) Extra Heavy-Duty Pinned Tapdown for use with the thickest action backed carpets Ultra Pin system for maximum holding strength 3/4” (19 mm) top face Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles 3/4″ (19 mm) Economy Large Lip Tapdown for use with the thickest action backed carpet. May be used in areas of low traffic Ultra Pin system as our other pinned metals for maximum holding strength Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles 51/64″ (20 mm) Heavy-Duty Pinned Tapdown used to hold down a very thick stretch of carpet Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 5/8″ (16 mm) Straight face pinned Tapdown for use with action back carpet Extra thick face insures long lasting quality installation Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 1/2″ (12.5 mm) Economy weight pinned Tapdown for use with low pile action backed carpet Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 2-1/2″ (63.5 mm) Ribbed Threshold designed for use in joining large gaps Can also be used as an expansion joint cover Suitable where low profile or wheelchair access is required Undrilled Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state,… 2-1/2″ (63.5 mm) Smooth-Top Threshold designed for use in joining large gaps Can also be used as an expansion joint cover Suitable for high traffic areas Undrilled Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore there is a… 2-1/2″ (63.5 mm) Ribbed Threshold designed for use in joining large gaps Can also be used as an expansion joint cover Undrilled Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore there is a high risk of oxidization on… 4″ (10 cm) Barrier Free quality extruded Aluminum Threshold designed for use in commercial applications Support bars built for added strength 1/4” (6.5 mm) low profile (LP) height Construction Materials Board (CMB) listed material Meets requirements of ADA, CAN/CSA-B651 and ADMG-1992 Undrilled Mill finish **DISCLAMIER: DO NOT USE MILL FINISH… 1-1/8” (28.5 mm) Drop Stair Nosing protects edge of stair from damage Designed for light commercial or residential use Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles 1-1/8” (28.5 mm) Drop Stair Nosing protects edge of stair from damage Designed for light commercial or residential use Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles Scribe to Nosing for 1/8” (3mm) VCT or resilient floors of similar thicknesses 1-5/8” (41mm) inside drop to work in most settings With adhesive reservoir for clean and easy installation Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles 1-3/8” (35mm) Drop Commercial Square Stair Nosing for use on concrete pan or square stair Can also be used as a heavy-duty corner guard Undrilled Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore there is a high risk… Full 2” (51mm) Drop Stair Nosing with 1-1/2” (38 mm) top tread protects edge of stair from damage The wider top tread allows for nosing to be secured away from stair edge especially when edges of stairs are damaged Covers most imperfections Designed for commercial and residential use Made of… 1-1/2” (38 mm) Drop x 2-1/2” (63.5 mm) Tread Stair Nosing provides excellent traction and protection at the edge of the stair Ideal for repairing stairs where existing nosing has worn out Designed for commercial use Undrilled Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles Specialty trim for counters, mirrors, fireplaces and more 1/2″ (12.5 mm) Angle designed for use on corners to protect edge. Can also be used as an accent. Can be drilled Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles 1/10″ (2.5 mm) Tile Edge Cap for Finishing the edge of tile or resilient floor Accommodates materials from 0.080” (2 mm) up to 1/8” (3 mm) thick Made of durable hammered aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 1/10″ (2.5 mm) Resilient Flooring Cap used when coving sheet goods up the wall to finish off the exposed edge For materials up to 1/10″ (2.5 mm) thick Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles ADA compliant profile 7/8” (22 mm) wide Hatch Cover molding used to cover gaps in the floor where hatch covers are installed Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore… Small face Cap Trim for 1/10” (2.5 mm) material. Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles Satin Clear Anodized (SCA) 1/2″ (12.5 mm) Z-Bar is an offset hearth metal for installing carpet around fireplaces Provides grip while remaining invisible Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore there is a high risk of oxidization on the product and… 2-1/4” (57 mm) wide Sabre Tooth Straight Edge allows carpet technician to cut carpet up to 12′ (3.7 m) wide Grooves prevent tool from moving by biting into carpet Clear Anodized to prevent marking carpet 5/16″ – 7/16″ (8 mm – 11 mm) Pinned Divider used where stretched in carpet meets ceramic, hardwood, laminate, cushion floor on plywood or sheet vinyl on subfloor. Can be adjusted to accept slightly thinner materials For commercial use For high traffic areas. Made of durable hammered aluminum Attractive finish… 5/16″ – 7/16″ (8 mm – 11 mm) Pinless Divider used where glue down carpet meets ceramic, hardwood, laminate, cushion floor on plywood or sheet vinyl on subfloor. Can be adjusted to accept slightly thinner materials For commercial use For high traffic areas. Made of durable hammered aluminum Attractive finish… 1/8″ (3 mm) Stainless Steel Cove Cap designed for use on the wall to provide a coved finish. Can be sealed with silicone to offer excellent resistance to dirt build up Accepts materials up to 1/8” (3 mm) thick ADA compliant profile 1/10″ (2.5 mm) Insert Cove for resilient sheet goods up to 3/32” (2.4 mm) Mill finish **DISCLAMIER: DO NOT USE MILL FINISH IN WET AREAS. MILL product is aluminum in its raw state, therefore there is a high risk of oxidization on the product and staining on the tile and/or… 1/16” (1.5 mm) Insert Cove for laminate material. Faite d’aluminium anodisé durable Les finis attrayants s’harmonisent à la plupart des styles de planchers les plus populaires d’aujourd’hui Find an authorized M-D® PRO Flooring Accessories distributor or retailer near you.
Aluminum Bevel Bar – Residential
Aluminum Bevel Bar – Economy
2 in. (51 mm) Aluminum Bevel Bar – Commercial
1-1/2 in. (38 mm) Aluminum Bevel Bar – Heavy Duty
Cap Tracks
Aluminum Cap Track – Pinless
Aluminum Cap Track – Extra Height – Pinless
Aluminum Cap Track – Pinned
Aluminum Cap Track – Extra Height – Pinned
Seam Binders
Aluminum Seam Binder
1 in. (25 mm) Aluminum Flat Joiner
Tapdowns
3/4″ (19 mm) Multi-Purpose Aluminum Tapdown
5/8 in. (16 mm) Heavy-Duty Aluminum Tapdown
1/2 in. (12.5 mm) Aluminum Tapdown – Pinless – Residential
3/4 in. (19 mm) Aluminum Tapdown – Pinless – Commercial
9/16 in. (14.5 mm) Aluminum Tapdown – Pinned – Residential
9/16 in. (14.5 mm) Aluminum Tapdown with Top Return – Pinned – Residential
5/8 in. (16 mm) Heavy-Duty Aluminum Tapdown – Pinned
3/4 in. (19 mm) Extra Heavy-Duty Aluminum Tapdown – Pinned
3/4 in. (19 mm) Economy Large Lip Aluminum Tapdown – Pinned
51/64 in. (20 mm) Heavy-Duty Aluminum Tapdown – Pinned
5/8 in. (16 mm) Straight Face Aluminum Tapdown – Pinned
1/2 in. (12.5 mm) Aluminum Tapdown – Pinned – Economy
Thresholds
2-1/2 in. (63.5 mm) Aluminum Ribbed Threshold – Low Profile
2-1/2 in. (63.5 mm) Aluminum Smooth-Top Threshold
Aluminum Ribbed Threshold
Barrier Free Aluminum Threshold
Stair Profiles
Explore Products
1-1/8 in. (28.5 mm) Aluminum Drop Stair Nosing – Economy
Aluminum Drop Stair Nosing
1-5/8 in. (41 mm) Aluminum Scribe to Nosing
1-3/8 in. (35 mm) Aluminum Drop Commerical Square Stair Nosing
2 in. (51 mm) Aluminum Drop Stair Nosing with Top Tread
Aluminum Drop Tread Stair Nosing – Commercial
Specialty Profiles
Explore Products
Aluminum Angle
1/10 in. (2.5 mm) Tile Edge Cap
Resilient Flooring Cap
7/8 in. (22 mm) Aluminum Hatch Cover
1/10 in. (2.5 mm) Aluminum Cap Trim
1/2 in. (12.5 mm) Aluminum Z-Bar
2-1/4 in. (57 mm) Aluminum Sabre Tooth Straight Edge
Aluminum Divider – Pinned – Commercial
Aluminum Divider – Pinless – Commercial
1/8 in. (3 mm) Cove Cap
1/10 in. (2.5 mm) Aluminum Resilient Floor Cove
1/16 in. (1.6 mm) Aluminum Insert Cove
Where to Buy
