Trims for Laminate & Wood Flooring
Our extensive selection of profiles and finishes for today’s hardwood and laminate installations
Trims for Laminate Flooring
Explore Products
MDF Profiles
T-Molding finishes gap between level flooring areas. To be used with 6 mm to 9 mm laminate/floating floors Reducer finishes edge between laminate/wood flooring and other hard surface or carpet. Finishes edge at outside doors. To be used with 6 mm to 9 mm laminate/floating floors Stair Nosing finishes edge of laminate/wood flooring at stairs. To be used with 6 mm to 9 mm laminate/floating floors Quarter Round finishes space between laminate/wood flooring and wall base. Special order only Shim, when used in conjunction with each other, can accommodate installation of the MDF moldings with floors up to 15 mm thick. Expansion Joint (Divider) for use with floating floors. Used when installing large areas of floating floors as an expansion joint. Overhang allows expansion of floors and eliminates buckling. Should be used for any installation greater than 12’ (3.7 m) in any one direction. Stair Nosing finishes edge of stair. For nosing applications use LM3002, LM3003 or LM3004 track. Floating Floor Reducer reduces from 5/16” (8 mm) to 1/8” (3 mm) flooring material. Used when butting floating floors on top of existing floors, subfloor, floor tile or resilient sheet goods For use with laminate flooring One piece floating floor End Stop (J-Mold) used when butting floating floors to walls, patio doors or other flooring materials of similar heights such as hardwood or ceramic tile. Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles One piece Expansion Joint (Divider) for floating floors. Used when installing large areas of floating floors as an expansion joint. Large overhangs allows expansion of floors and eliminates buckling. Should be used for any installation greater than 12’ in any one direction. Made of durable anodized aluminum Attractive finish complements… Easy to install snap-in track design for use with laminate flooring. Made of rigid PVC. One piece floating floor Reducer used when butting floating floors up to 1/8” (3 mm) tile or resilient sheet goods. Large overhang allows laminate floor to expand and contract up to 1/2” (12.5 mm) Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles One piece floating floor Stair Nosing used when installing floating floors on stairs. Can also be used with ceramic tiles or other floors of similar thickness. Made of durable anodized aluminum Attractive finish complements today’s most popular flooring styles Equalizer joins adjacent floor height differentials. Pre-drilled with a sanded but unfinished surface. Overlap Edging for use with resilient floors or tile up to 1/8”. Pre-drilled with a sanded but unfinished surface. Reducer used when butting floating floors up to 1/8” (3 mm) tile or resilient sheet goods. Items supplied undrilled. Reducer molding for reducing 3/4” flooring materials such as ceramic or hardwood. Gives smooth transition from lower to higher floors. Joins adjacent floor height differentials. Items supplied undrilled. Seam binder for joining adjacent floors of equal height. Items are supplied pre-drilled with a sanded but unfinished surface. Equalizer joins adjacent floor height differentials up to 3/16” (5 mm). Items supplied undrilled. Reducer molding for reducing flooring materials such as ceramic or hardwood. Gives smooth transition from lower to higher floors. Items supplied undrilled. Reducer molding for reducing 3/4” hardwood to carpet. Items supplied undrilled. Seam binder for joining adjacent floors of equal height 1-3/4” (4.5 cm) wide. Items supplied undrilled. Stair Nosing finishes 3/4” (2 cm) hardwood at top of stairs or landings. Items supplied undrilled. T-Molding joins adjacent floors of equal heights. Items supplied undrilled. T-molding for joining adjacent floors of equal height 1-3/4” (4.5 cm) wide. Items supplied undrilled. Colonial baseboard provides a traditional solution for most interior spaces. The classic curved design adds charm and finishing flare. Economy Base Shoe can be used where less visibility and protrusion from the wall base is desired. Use to hide any imperfections, gaps and height differences between laid flooring surfaces and the baseboard. Quarter round, the universal baseboard finishing accessory! Use to hide any imperfections, gaps and height differences between laid flooring surfaces and the baseboard. Premium base shoe/door stop is a great alternative to quarter round finishing. It adds a continuation of the colonial design to the base while also hiding any imperfections, gaps and height differences between laid flooring surfaces and the baseboard. This profile is often used as a door stop as well. Find an authorized M-D® PRO Flooring Accessories distributor or retailer near you.
MDF Laminate T-Molding
MDF Laminate Reducer
MDF Laminate Stair Nosing
MDF Laminate Quarter Round
MDF Laminate Shim
Aluminum Profiles
5/16 in. (8 mm) Laminate Expansion Joint (Divider)
5/16 in. (8 mm) Laminate Stair Nosing
Laminate Reducer
Metal Laminate End Stop (J-Mold)
Metal Laminate Expansion Joint (Divider)
5/16 in. (8 mm) PVC Track for Laminate Flooring – Snap-In Design
Metal Laminate Reducer
Metal Laminate Stair Nosing
Trims for Hardwood Flooring
Explore Products
Oak & Maple
Unfinished Oak Equalizer
Unfinished Oak Overlap Edging
Unfinished Oak Reducer
3/4 in. (2 cm) Unfinished Oak Reducer
Unfinished Oak Seam Binder
Unfinished Equalizer
Unfinished Reducer
3/4 in. (2 cm) Unfinished Reducer
Unfinished Seam Binder
Unfinished Stair Nosing
Unfinished Oak T-Molding
Unfinished T-Molding
Primed Pine
4-1/4 in. (10.7 cm) Primed Pine Colonial Base
11/16 in. (1.7 cm) Primed Pine Economy Base Shoe
5/8 in. (1.6 cm) Primed Pine Quarter Round
1/8 in. (2.8 cm) Primed Pine Premium Base Shoe / Door Stop
Where to Buy
